Engine head and timing belt - Engine Care & Maintenance Forum
Engine Care and Automotive Maintenance Forum Engine Care and Automotive Maintenance Forum

» Auto Insurance
Wheel & Tire Center

Go Back   Engine Care & Maintenance Forum > Engine Care & Maintenance > Engine Valves/Seals
Register Home Forums Active Topics Photo Gallery Garage Blogs Search Today's Posts Mark Forums Read Auto EscrowInsurance Advertise

Engine Valves/Seals Discuss engine valve/seal issues in here.

Engine-Care.com is the premier Engine Care Forum on the internet. Registered Users do not see the above ads.
LinkBack Thread Tools Display Modes
Old 07-15-2018, 08:52 PM   #1 (permalink)
Junior Member
Join Date: Jul 2018
Posts: 1
Default Engine head and timing belt

I had to put a reworked head on my 1990 Honda Accord. I have an oil leak issue. I think it is because I did not get the seals correct on the inner plastic part of the timing cover that has 3 seals on it. I have 4 Honda Accords 1990, 1991, 1993, and a 2000, I have replaced the timing belt on 3 of 4 with no problems. This is the first time I have had to swap a head. I am sure the head itself is on correctly. The seals on the inner part of the timing belt cover set are where I think the problem is because I am leaking oil from that area.
GE121987 is offline   Reply With Quote
Sponsored Links

  Engine Care & Maintenance Forum > Engine Care & Maintenance > Engine Valves/Seals

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
plastic cover is on motor head. screwdriverZ01 Air Filter/Throttle Body/Carburetor 0 06-23-2011 06:09 PM
Engine Gone? Misfire - Oil gone and metal in it P1349 Engine Valves/Seals 1 12-07-2008 08:38 PM
Gum Out blows head gasket? luckymonkeygarage Fuel Systems (Gasoline) 1 09-04-2008 10:59 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 01:12 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.2
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
(c) AutoForums.com, Inc.